Standard pillow dimensions in the USA are 20″ x 26″ (51 x 66 cm). That is the standard pillow size for most bed pillows sold in the US.
This guide gives you a full pillow size chart for standard, queen, king and Euro pillows. You will also learn which size fits your bed and how to measure a pillow at home.
Key takeaways
- Standard: 20″ x 26″. Queen: 20″ x 30″. King: 20″ x 36″. Euro: 26″ x 26″.
- Most bed pillows are 20″ wide. Only the length changes.
- Match your pillow to your mattress width, sleep position and loft.
Table of Contents
Standard Pillow Dimensions and Size Chart

Here is the standard pillow size chart for the USA:
| Pillow size | Inches | Centimeters | Pillowcase to use |
|---|---|---|---|
| Standard | 20″ x 26″ | 51 x 66 cm | Standard |
| Super standard | 20″ x 28″ | 51 x 71 cm | Standard or queen |
| Queen | 20″ x 30″ | 51 x 76 cm | Queen (a standard case also works) |
| King | 20″ x 36″ | 51 x 91 cm | King |
| Body pillow | 20″ x 54″ | 51 x 137 cm | Body pillowcase |
Pillow size is written as width by length. A 20″ x 26″ pillow is 20 inches wide and 26 inches long.
Loft matters too. Loft is the pillow’s height, and it usually runs 4 to 7 inches. Two pillows with the same pillow dimensions can feel very different if their loft differs.
Brands also vary. A pillow labeled “standard” can be off by an inch because of its filling and stitching. Always check the tag.
Shopping from abroad? UK and Australian standard pillows are close to 48–50 x 73–75 cm. That is not the same as the US standard.
Standard vs Queen vs King Pillow Size

The queen pillow size is 20″ x 30″. The king pillow size is 20″ x 36″. That makes a king pillow 6 inches longer than a queen.
| Standard | Queen | King | |
|---|---|---|---|
| Size | 20″ x 26″ | 20″ x 30″ | 20″ x 36″ |
| Best for | Twin to queen beds | Queen beds, restless sleepers | King beds, active sleepers |
| Pros | Fits most beds, easy to find | More room to shift | Fills wide beds, good backrest |
| Cons | Short for tall or restless sleepers | Less common | Too long for small beds |
Is 20×30 a standard pillow size? No. That is a queen pillow. It often fits a standard pillowcase, but the fit is tighter. That can make the pillow feel firmer and taller.
A super standard pillow sits in between at 20″ x 28″. It is only two inches longer than standard, and it is harder to find in stores.
Quick pick by sleep position:
- Side sleepers: a standard or queen pillow with higher loft.
- Back sleepers: a queen or king pillow with medium loft.
- Stomach sleepers: a standard pillow with low, soft loft.
- Combination sleepers: a queen or king pillow for extra room.
Euro, Throw and Specialty Pillow Dimensions

Euro pillow dimensions are 26″ x 26″. These square pillows sit at the back of a bed or sofa. People use them for looks, and also to prop up their backs while reading.
Throw pillows come in many sizes. The most common is 18″ x 18″, and they run up to 28″ square.
| Throw pillow size | Typical use |
|---|---|
| 16″ x 16″ | Small accent on a bed or chair |
| 18″ x 18″ | Most common sofa size |
| 20″ x 20″ | Medium accent for sofas and beds |
| 22″ x 22″ to 24″ x 24″ | Full, plush look |
| 26″ x 26″ | Euro size |
Choose one that is 1 to 2 inches larger than the cover. This gives a fuller, firmer look and keeps the corners from sagging.
Other specialty pillow sizes to know:
- Lumbar pillow: about 12″ x 20″. It supports the lower back.
- Travel pillow: about 12″ x 16″. It fits in a carry-on.
- Toddler pillow: often 13″ x 18″. It suits children over age 2.
- Knee, wedge and bolster pillows: sizes vary by brand. Each supports a specific body area.
Bed styling tip: On a queen bed, try two sleeping pillows, two Euro pillows and one or two throw pillows. On a king bed, use two king pillows and add a third Euro pillow for balance.
While choosing the right pillow size for a comfortable and well-balanced bedroom, it’s equally important to consider the dimensions of other bathroom essentials when planning your home. Understanding standard bathtub sizes and dimensions can help you select a tub that fits your bathroom layout while providing the comfort and functionality you need.
Which Pillow Size Is Right for Your Bed?

Start with your mattress width. Then check how many pillows fit side by side.
| Mattress | Width | Best pillow setup |
|---|---|---|
| Twin / Twin XL | 38″ | One standard, super standard or queen |
| Full | 54″ | Two standard pillows |
| Queen | 60″ | Two standard, super standard or queen pillows |
| King | 76″ | Two king pillows |
| California king | 72″ | Two king pillows |
Larger beds, such as a split king or Alaskan king, usually take king pillows. Add more pillows if you want a fuller look.
The math is easy. Divide your mattress width by the number of pillows. Two queen pillows (2 x 30″) fill a 60″ queen bed exactly.
How to measure a pillow:
- Take off the pillowcase.
- Lay the pillow flat on a hard surface.
- Measure the short side edge to edge. This is the width.
- Measure the long side edge to edge. This is the length.
Use a ruler or yardstick. A soft tape can sag and give a wrong number.
Common mistakes to avoid:
- Choosing by bed name only. A “queen” bed does not need a “queen” pillow.
- Ignoring loft, which affects neck comfort most.
- Buying the wrong pillowcase size, which causes stretching or bunching.
- Picking a pillow too long for a twin bed.
Why this matters: About 30.5% of US adults slept under seven hours a night in 2024, according to the CDC National Center for Health Statistics. A well-fitted pillow will not fix that alone. But it can help you stay comfortable and keep your neck and spine aligned.
FAQs
What is the size of a standard pillow?
A standard pillow is 20″ x 26″ (51 x 66 cm) in the USA.
Is 20×26 a standard pillow?
Yes. 20″ x 26″ is the standard US pillow size.
What is the standard size of a throw pillow?
The most common throw pillow size is 18″ x 18″. Sizes range up to 28″ x 28″.
Is 20×30 a standard pillow size?
No. 20″ x 30″ is a queen pillow. It is 4 inches longer than a standard pillow.
How big is a 20×20 pillow?
It is 20 inches by 20 inches, or about 51 x 51 cm. It is a medium square throw pillow.
What is an ideal pillow size?
The ideal pillow size depends on your bed, sleep position and comfort. A standard or queen pillow suits most beds up to queen. A king pillow suits king beds and active sleepers.
Conclusion
Standard pillow dimensions are 20″ x 26″, but the best size is the one that fits your bed and keeps you comfortable. Measure your mattress, check the loft, and pick the length that suits how you sleep.

Measurement Researcher, Size Comparison Writer & Content Specialist
Timmy Ahad is a dedicated content writer and research specialist at SizesVisualizer.com, where he focuses on creating accurate, easy-to-understand content about measurements, dimensions, size comparisons, and real-world object visualization.










